7 Things to Know Before Purchasing a Furnace in Edmonton
Purchasing a new furnace may not be a concern right away. But it’s smart to learn the things that will likely impact your choice when you’re ready to buy. Here are seven things you’ll want to think about when you’re due for furnace replacement in Edmonton.
1. Size and Installation Quality
To operate at maximum efficiency and comfort, your furnace must be correctly sized for your home. When it comes to furnaces, bigger is certainly not better. We frequently get requests from customers to install a big furnace in the misguided belief that a larger furnace is either more reliable or will provide better comfort.
The reverse is true. Oversized furnaces will short cycle, or constantly turn on and off. This leaves you uncomfortable, with more expensive energy bills and a furnace that could wear out much sooner.
This is why it’s crucial to work with the right company when purchasing a new furnace. Even if it’s the right size but installed wrong, the U.S. Department of Energy says you could lose as much as 30% of your energy efficiency.
Another key component of installation is ductwork. If yours is old or improperly designed, you might have issues with noise or comfort. A furnace is only as effective as the duct system it’s linked to.
At Service Experts Heating & Air Conditioning, our Expert HVAC technicians are licensed, which means they’re knowledgeable about repairing and installing various types of home comfort systems. In addition to technical skill, our technicians are also trained in treating you ethically. We also support our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are rated by a term known as AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The greater the number, the less gas is wasted during the heating process.
If your present furnace is 15 years old, it’s likely rated well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re wasting up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work today:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—best efficiency rating available.
3. Blower Motor Technology
As you research new furnaces there is one more important consideration: blower technology. This part circulates air throughout your home. And it also consumes a lot of electricity, so it’s essential to know about your options.
There are three kinds of blowers available on furnaces nowadays. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a traditional blower motor that’s been mostly the same for the past 30 years. This motor is the least costly and also the least energy efficient.
- Constant torque motor. This technology finds a balance between price and energy efficiency. It delivers an electrical efficiency boost over a traditional motor design.
- Variable-speed motor. The most energy-efficient furnaces can operate at different speeds. Instead of running at full blast 24/7, they will quietly operate at a low or medium speed at times. This helps improve your comfort while keeping energy costs down, both in the winter and summer. And it also keeps indoor humidity under control.
4. Sound Reduction Technology
Sound has become a very important consideration with furnace installation, so another great improvement has been keeping noise under control. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Nearly silent gas burners
With this technology, you might not even notice that your furnace is running.
5. Smart Thermostat
You probably use a programmable thermostat, but chances are you probably aren’t making the most of your energy savings. These thermostats can be challenging to program, especially if your schedule varies from day to day.
A smart thermostat removes all the guessing about energy efficiency. Many models can pick up on your temperature preferences and then create an energy-saving schedule to match. They also recognize when you’re home or away and will adjust your heating and cooling as necessary.
As a bonus, you’ll also be able to monitor and change your settings from just about anyplace on your phone. Some models can even notify you if they detect a problem with your furnace or remind you when it’s time to replace your air filter.
6. Warranty
There’s a significant difference in furnace quality and reliability. Like any big purchase, we believe it’s wisest to go with a major brand name. With a top brand like Lennox® or Goodman®, you’ll have more confidence in the technology and that the manufacturer will uphold its product warranty over the long haul.
Furnaces typically have two primary warranty coverage areas:
- Heat exchanger. This is the heart of the furnace and the most expensive component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can differ based on the manufacturer and furnace model.
- Main parts. This includes the blower motor, electronic controls, ignitors and other important parts. Warranties can vary from as short as a one-year limited warranty to as long as a 10-year limited warranty.
When reviewing warranty coverage, it’s essential to know it’s limited. So, you should make sure you get the limitations. For instance, nearly all standard manufacturer warranties only include the cost of the replacement part, not labour. And labour on a replacing heat exchanger could get costly.
Once your new furnace is installed, make sure you finish the product registration immediately. Many manufacturers may limit the warranty term if the product registration is not done. This step is simple and usually only takes a few minutes.
7. Cost
How much does all this cost anyhow? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency model.
As you consider these costs and the impact to your budget, keep in mind that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it provides.
A couple of additional ways to save include:
- Replacing your air conditioner simultaneously.
- Purchasing at the ideal time, such as in early fall, mid-winter and early spring. You may be able to get extra discounts and rebates during this less busy season.
- Take advantage of rebates from the federal and province government, as well as from your local utility company. We can help you navigate this process.
- Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to look for in a new furnace, when should you replace your outdated one? Here are a few ideas from our Experts that will help you make that decision.
Age
Heating systems usually last 15–20 years. How long yours will last depends on whether you’ve kept up with furnace maintenance, where you live and your desired temperature. If you’re in a place with harsh winters, your furnace will operate more often, potentially making it wear out faster. The same applies if you like to keep your home at a hotter temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces get older, the likelihood for frequent furnace repair goes up. If your system is more than 15 years old, those repairs can be especially costly. Common and costly repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are more than the half the price of a new furnace, it’s generally best to replace it.
Energy Efficiency
Furnaces older than 15 years can be very inefficient. You could be throwing away as much as 30% of the money you spend to keep your home warm. High energy costs and the desire to decrease energy use are also strong reasons to think about replacing your furnace. In fact, an independent study by Decision Analyst reveals nearly 20% of homeowners who recently replaced their furnace specifically did so to lower their utility bills.
Trust Your Furnace Replacement to the Experts
It can seem intimidating trying to research furnace features on your own. Or know exactly when you should get a new furnace. Our Service Experts Heating & Air Conditioning Experts are here to make the process much simpler. Call us at 587-404-0790 or schedule an appointment online to request your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.